High Pressure GI Puddle Flange Manufacturer in Lower Parel, Worli, Grand Road, Vasai, Virar, Dadar, Kalyan, Ambernath, Thane, Ghatkopar, Vashi, Panvel, Andheri, Borivali

GI PUDDLE FLANGES

GI Puddle Flange is a type of pipe fitting that is used to prevent water from seeping through concrete structures, especially in areas that are prone to flooding. "GI" stands for galvanized iron, which is a type of steel that has been coated with a layer of zinc to protect it from corrosion.

The puddle flange is installed at the base of a vertical pipe, where it penetrates a horizontal surface such as a floor or a roof. The flange creates a barrier around the pipe, preventing water from entering the structure through the gap between the pipe and the concrete surface.

The galvanized iron material used to make the puddle flange is resistant to rust and corrosion, which makes it suitable for use in harsh environments. The flange is designed to be welded onto the pipe, creating a secure and leak-proof seal. The installation of a GI puddle flange helps to ensure the structural integrity of the building and prevent water damage.

 

• Puddle flanges are commonly used in construction projects to prevent water from seeping through concrete structures where pipes penetrate horizontal surfaces. These can include foundations, basements, walls, roofs, and other similar areas.
• A GI Puddle Flange typically consists of a circular flange that is attached to a vertical pipe. The flange has a raised rim around the outer edge that forms a barrier against water penetration. The flange is usually made of galvanized iron to provide additional protection against rust and corrosion.
• The flange is typically installed during the construction of the concrete structure, at the point where the pipe will pass through the concrete. The flange is then secured to the pipe using welding or other mechanical means.
• In addition to preventing water infiltration, GI Puddle Flanges can also be used to protect the concrete from chemical or corrosive damage that may be caused by the contents of the pipe.
• GI Puddle Flanges come in various sizes and dimensions to fit different pipe diameters and concrete thicknesses. The selection of the appropriate flange size depends on the pipe diameter, the concrete thickness, and the expected water pressure.
• GI Puddle Flanges can be used in various applications such as plumbing, sewage, drainage, and other similar systems. They are commonly used in high-rise buildings, commercial structures, and industrial facilities.

GI PUDDLE FLANGE SPECIFICATIONS

Material: Galvanized Iron (GI) or Mild Steel Size: Available in different sizes ranging from 50mm to 300mm Thickness: 3mm to 5mm (depending on the size) Standard: Generally, conforms to ASME B16.5, IS 6392, and ASTM A105 Pressure rating: Depending on the size, pressure ratings can vary from PN 10 to PN 40 Flange face type: Generally, raised face (RF) flange is used, but flat face (FF) and ring-type joint (RTJ) flanges can also be used. Gasket type: Typically, a rubber or neoprene gasket is used between the flange and the concrete structure. Surface finish: Generally, the flange is hot-dip galvanized to provide additional protection against rust and corrosion.

GI PUDDLE FLANGE HSN CODE

The Harmonized System of Nomenclature (HSN) code for GI Puddle Flanges is 7307.99.90. This code falls under the broader category of "Tube or Pipe Fittings of Iron or Steel" and is used to classify these products for customs and tax purposes.

It's important to note that HSN codes can vary by country or region, so it's always best to confirm the specific code with your local customs or tax authorities to ensure compliance.

TYPES OF GI PUDDLE FLANGE

There are mainly two types of GI Puddle Flanges based on their design and application. These are:

1.      Flat Plate Puddle Flange: This type of puddle flange consists of a flat plate with a raised collar around its circumference. The plate is typically bolted to the underside of the horizontal surface, with the vertical pipe passing through the center of the flange. The raised collar forms a barrier against water penetration and directs water away from the pipe.

2.      Sleeve Type Puddle Flange: This type of puddle flange consists of a cylindrical sleeve that fits around the vertical pipe and extends through the horizontal surface. The sleeve is typically welded to the pipe and provides a seal against water infiltration. The top of the sleeve is flared to form a collar that directs water away from the pipe.

Both types of GI Puddle Flanges are used to prevent water from seeping through concrete structures where pipes penetrate horizontal surfaces. The selection of the appropriate type of flange depends on the specific application, pipe diameter, concrete thickness, and expected water pressure.

4 TO 12 INCH GI PUDDLE FLANGE

I Puddle Flanges are available in different sizes, including 4 to 12 inches. The specific size of the flange depends on the diameter of the pipe that is passing through the horizontal surface and the thickness of the concrete.

Here are some general specifications for GI Puddle Flanges in the 4 to 12 inch size range:

• Size: 4 inch, 6 inch, 8 inch, 10 inch, and 12 inch
• Material: Galvanized Iron (GI) or Mild Steel
• Thickness: 3mm to 5mm (depending on the size)
• Standard: Generally, conforms to ASME B16.5, IS 6392, and ASTM A105
• Pressure rating: Depending on the size, pressure ratings can vary from PN 10 to PN 40
• Flange face type: Generally, raised face (RF) flange is used, but flat face (FF) and ring-type joint (RTJ) flanges can also be used.
• Gasket type: Typically, a rubber or neoprene gasket is used between the flange and the concrete structure.
• Surface finish: Generally, the flange is hot-dip galvanized to provide additional protection against rust and corrosion.

It's important to note that the specifications of GI Puddle Flanges can vary depending on the manufacturer, the specific application, and the project requirements. Always consult the manufacturer's specifications and installation instructions before selecting and installing a GI Puddle Flange.

HIGH PRESSURE GI PUDDLE FLANGE

High Pressure GI Puddle Flanges are designed to withstand higher water pressure levels and are typically used in applications where the pressure of the water is significant. The specific pressure rating of the flange depends on the size, material, and design of the flange.

Here are some general specifications for High Pressure GI Puddle Flanges:

• Material: Galvanized Iron (GI) or Mild Steel
• Size: Available in different sizes ranging from 50mm to 300mm
• Thickness: 3mm to 5mm (depending on the size)
• Standard: Generally, conforms to ASME B16.5, IS 6392, and ASTM A105
• Pressure rating: Depending on the size, pressure ratings can range from PN 63 to PN 250
• Flange face type: Generally, raised face (RF) flange is used, but flat face (FF) and ring-type joint (RTJ) flanges can also be used.
• Gasket type: Typically, a rubber or neoprene gasket is used between the flange and the concrete structure.
• Surface finish: Generally, the flange is hot-dip galvanized to provide additional protection against rust and corrosion

TOP 4 GI PUDDLE FLANGE MANUFACTURER IN MUMBAI

There are several manufacturers of GI Puddle Flanges in Mumbai, India. Here are a few companies that manufacture GI Puddle Flanges in Mumbai:

1.      World Piping Solutions: World Piping Solutions  is a leading manufacturer and supplier of a wide range of industrial fittings, including GI Puddle Flanges. The company has a state-of-the-art manufacturing facility in Mumbai and uses high-quality materials and advanced technology to manufacture their products.

2.      Petro Steel Industries.: Petro Steel Industries is a Mumbai-based Lower Parel, Worli, Grand Road, Vasai, Virar, Dadar, Kalyan, Ambernath, Thane, Ghatkopar, Vashi, Panvel, Andheri, Borivali,  company that specializes in the manufacturing and supply of various types of flanges, including GI Puddle Flanges. The company has a well-equipped manufacturing facility and employs skilled professionals to ensure that their products meet international standards.

3.      Zara Metal Industries: Zara Metal Industries is a Mumbai-based manufacturer and supplier of industrial fittings and flanges, including GI Puddle Flanges. The company has a large manufacturing facility and uses the latest technology to produce high-quality products.

4.      Komal Pipe Products: Komal Pipe Products is a Mumbai-based Dombivli company that specializes in the manufacturing and supply of a wide range of industrial fittings, including GI Puddle Flanges. The company has a well-equipped manufacturing facility and uses high-quality materials to ensure that their products meet international standards.

GI PUDDLE FLANGE PRICE LIST

The price of GI Puddle Flanges can vary depending on several factors, such as the size, pressure rating, material, and manufacturer. Additionally, prices can vary based on the location and availability of the product. Therefore, it's difficult to provide a definitive price list for GI Puddle Flanges.

However, to give you a general idea of the price range, here are some estimates for GI Puddle Flanges in India:

• 4 inch GI Puddle Flange: INR 1500 - INR 2000 per piece
• 6 inch GI Puddle Flange: INR 2000 - INR 2500 per piece
• 8 inch GI Puddle Flange: INR 2500 - INR 3500 per piece
• 10 inch GI Puddle Flange: INR 3500 - INR 4500 per piece
• 12 inch GI Puddle Flange: INR 4500 - INR 5500 per piece